Enable Color Customization for Crestron Enclosure LED Lights

    If you have enclosures for your Crestron touch screen that include colored LEDs that light up to indicate the status of the room (available, busy, Check-in), then you can customize the color of the lights.

    Last updated: March 25th, 2019

      If you have enclosures for your Crestron touch screen that include colored LEDs that light up to indicate the status of the room (available, busy, Check-in), then you can customize the color of the lights. The default colors for LEDs for Crestron are red, green, and yellow. The color for the lights are triggered by a tone played from the device that you can set from app.teem.com. The color for your lights are determined via an RGB color value. Follow these steps to customize the color of the lights.

      1. After signing in to app.teem.com, go to Locations.
      2. Select the campus you'd like to manage, and then click on APP SETTINGS OVERRIDES.

      3. Scroll to 3rd Party Integrations and under Enable LED Enclosures you'll find inputs for Available Frequency, Occupied Frequency, Check-in Frequency.

      4. Enter RGB values according to the notes below to customize the colors for those inputs and click Save Changes.

      Note: The input must always start with 1.

      Note: The input must always start with one and each color value must be represented by 3 digits


      Note: The input must always start with 1. For example, if you'd like to set the Available Frequency to the color red, the RGB value is 255,0,0, so the input would be 1255000000 or if you'd like to set the Available Frequency to the color green, the RGB value is 124, 252, 0, so the input would be 1124252000.





      Was this article helpful?

      Send feedback

      Get In Touch With Us

      Start a Support Ticket